TIRTEO – integrated window system insulated shoulder

Foto d'immagine Monoblocco TIRTEO by Endotek

SCUDO integrated window system insulated shoulder, for frame only without any provision for external blind, made of high density EPS 250 (approximately 30-35 kg/m2), OSB 3 wood and purenit.

The system allows you to install the window frame on three sides.

Shoulders and across

Shoulders and crosspiece in high density EPS 250 material (30-35 kg/mc), with thermal conductivity equal to 0.034 W/m·K and OSB 3 wood with thermal conductivity equal to 0.1 W/m·K, without metal components; the shoulders are assembled and sealed at the joints with the crosspiece and the under-bench in such a way as to guarantee permanent air tightness.

Technical specifications:

  • Shoulder and crosspiece width 89 mm (EPS 65 mm + OSB 3 mm 18 + leveling reference 6 mm)
  • Total depth of the shoulder: defined by the customer;
  • Positioning of the frame: flush with the internal wall or in a stack;
  • Frame location: defined by the client;
  • References for plaster or smoothing with plaster holder profiles with 6mm h mesh;

Fourth side

Under-pallet in high density EPS 250 (approximately 30-35 kg/mc), with thermal conductivity equal to 0.034 W/m·K; purenit reinforcement profile with thermal conductivity equal to 0.086 W/m·K; crosspiece in OSB 3 at the base with thermal conductivity equal to 0.1 W/m·K.

All elements are assembled and sealed at the joints with the shoulders in such a way as to guarantee permanent air tightness.

Technical specifications:

  • Height of the sub-pallet 112 mm;
  • Standard height of the threshold compartment 36 mm (modifiable);
  • Standard depth of threshold insulation 30 mm (modifiable);
  • Standard deviation of the insulation from the internal wall edge of the shoulders 15 mm (modifiable).

Materials, characteristics

EPS 250
AC density 30-35 Kg/mc;
thermal conductivity λ=0,034 W/m·K; compressive strength kPa 250;
water absorption for long-term immersion (28 days) WL(T)i ≤ 2%

OSB 3 (load-bearing panels for use in humid locations)
Thermal conductivity λ=0.1 W/m·K;
resistance to vapor diffusion 90-150;
longitudinal bending resistance 18 N/mm²;
transversal bending resistance 9 N/mm²;
insect attack excluded in areas with a temperate climate.

PURENIT
Thermal conductivity λ=0.086 W/m·K;
water absorption after 24 hours of soaking approx. 5% with change in size of approx. 0.4%

Logo Monoblocco Scudo Endotek
Render tecnico Monoblocco TIRTEO by Endotek
Name
integrated window system insulated shoulder
Material
Sintered expanded polystyrene
Category
Scudo integrated window system
Share
Render tecnico frontale Monoblocco TIRTEO by Endotek