IBICO – integrated window system with box for external tent

SCUDO integrated window system with box for external awning and fourth side with under-bench for frame and for external awning, made of high density EPS 250 (approximately 30- 35 kg/m2), OSB 3 wood and purenit.

The system allows you to install the window frame on three sides.

Box

Box made of high-density EPS 250 material (approximately 30-35 kg/mc) and thermal conductivity equal to 0.034 W/m·K, without metal components; side ends in OSB 3 wood with thermal conductivity equal to 0.1 W/m·K internally lined with high density EPS 250; exit hole for corrugated.

External inspection compartment. Veil and inspection compartment are equipped with reference profiles for external smoothing in PVC with mesh.

The box is sealed at the joints with the shoulders and the crosspiece in such a way as to guarantee permanent air tightness.

Technical specifications:

• Total depth of the box: variable based on the thickness and stratigraphy of the wall.
• Box height: variable based on the height of the box of the external awning to be inserted.
• References for external plaster or skim coat with plaster holder profiles with 6mm h mesh.

Shoulders

Shoulders in high density EPS 250 material (30-35 kg/mc), with thermal conductivity equal to 0.034 W/m·K and OSB 3 wood with thermal conductivity equal to 0.1 W/m·K, without metallic components; OSB 3 wooden crosspiece without metal components; the shoulders are assembled and sealed at the joints with the crosspiece, with the box and with the under-bench in such a way as to guarantee permanent air tightness.

Technical specifications:

• Shoulder width 89 mm (EPS 65 mm + OSB 3 mm 18 + leveling reference 6 mm);
• Total depth of the shoulder: defined by the customer;
• Positioning of the frame: flush with the internal wall or in a stack;
• Frame location: defined by the client;
• References for external plaster or skim coat with plaster holder profiles with 6mm h mesh.

Fourth side

Under-pallet in high density EPS 250(approximately 30-35 kg/mc), with thermal conductivity equal to 0.034 W/m·K; purenit reinforcement profile with thermal conductivity equal to 0.086 W/m·K; crosspiece in OSB 3 at the base with thermal conductivity equal to 0.1 W/m·K.

All elements are assembled and sealed at the joints with the shoulders in such a way as to guarantee permanent air tightness.

Technical specifications:

• Height of the sub-pallet 112 mm;
• Standard height of the threshold compartment 36 mm (modifiable);
• Standard depth of threshold insulation 30 mm (modifiable);
• Standard deviation of the insulation from the internal wall edge of the shoulders 15 mm (modifiable).

Materials, characteristics

EPS 250
AC density 30-35 Kg/mc;
thermal conductivity λ=0,034 W/m·K ;
compressive strength kPa 250;
water absorption for long-term immersion (28 days) WL(T)i ≤ 2%

OSB 3 (pannelli portanti per uso in luogo umido)
Thermal conductivity λ=0.1 W/m·K;
resistance to vapor diffusion 90-150;
longitudinal bending resistance 18 N/mm²;
transversal bending resistance 9 N/mm²;
insect attack excluded in areas with a temperate climate.

PURENIT
Thermal conductivity λ=0.086 W/m·K;
water absorption after 24 hours of soaking approx. 5% with change in size of approx. 0.4%