Foldable sunshade with wire system
Foldable sunshade awning with “Z” shaped blade with lateral edging which, added to the central rib, gives greater sturdiness. Riveted Texband passage blade holes. Tension of the awning ensured by 8 mm Texband tapes with 100,000 certified movement cycles. Orientation movement regulated by terylene belts composed of Aramid and Kevlar anchored to the slats via stainless steel hooks that can be opened to allow any replacement on site.
At the ends of the blades, there are slots for the passage of the steel cable guide. These slots are riveted to ensure that the cable guide does not deteriorate with continuous rubbing. In the upper part, the steel maneuvering channel, facing downwards, allows inspection and collects the components that allow the transmission of movement, whether by winch or motor. Inside are housed the variators necessary for winding the Texband and orientating the blades using terylene which is in turn connected with stainless steel clips (called mammoth).
The transmission component is a splined Ø14 mm extruded aluminum shaft that passes through the variators.
Winch operation direct or sent at 45° or 90°, articulated crank with Ø15 mm aluminum rod.
Mechanical motor movement: The motor power is calculated based on the size of the awning. The engine has a Hirschmann Stas 3 watertight plug (called male) combined with the Stak 3 socket (called female).
90 Cable at a glance
PVC covered steel guides Ø 3 mm
- Maximum achievable surface 9 m2
- Ideal for covering double skin facades
- Guides with reduced visual impact
- 75% dimming