Wooden roller cover without insulation

Roller cover with internal front inspection made with perimeter structure on four sides and possible wooden cover with a thickness of 18 mm and a closing front in MDF with a thickness of 14 mm with white ABS edging, section 27×2 mm. The ceiling, in the standard version, is made detached from the base of the box.

It is available in the following solutions:
A) Structure (and possible ceiling) in raw plywood and front in raw MDF;
B) Structure (and possible ceiling) in plywood with a white background and front in MDF with a white background;
C) Structure (and possible ceiling) in white laminated OSB 3 and front in white melamine-faced MDF;

The closure must be made with screws covered with white PVC caps (supplied). We recommend the use of 600 Pa self-expanding tape to obtain reliable air tightness and consequently the best thermo-acoustic performance.

Optional on request:
– 600 Pa pre-compressed tape supplied mounted in the front closing side box;
– 600 Pa pre-compressed tape supplied mounted on the external side;
– Celino made in a single piece with the base of the box